InSinkErator CWT-00 Indoor Furnishings User Manual


 
HOW TO USE THIS INSTRUCTION MANUAL
These instructions are separated into main sections, indicated by numbers, and subsections,
indicated by capital letters. The manual is setup this way to allow you to take a break at any
point after completing a section or subsection without affecting the installation process.
What you’ll see in the
instruction manual:
Property Damage: Do not pinch or break tubing.
Do not distort the last 1 inch of tubing.
B
Attach
s
upplied quick connect elbow to
end of supplied blue 1/4" tube.
Attach
quick connect elbow with
blue tube
to water Outlet on front
of chilled water tank.
Measure distance from tank outlet to
water supply line on faucet
. Carefully
trim blue tube to correct length.
Using quick connect elbow, connect
blue tube to faucet water supply.
Outlet
1
2
3
Provides a step-by-step narrative describing the installation step, with check boxes that
can be marked as you progress through the installation.
Contains simple illustrations that provide visual instruction to support the narrative.
CAUTIONS, WARNINGS and DANGERS that will require your attention during the step.
1
2
3
An imminently hazardous situation, which, if not avoided, will result in death or serious injury.
A potentially hazardous situation, which, if not avoided, could result in death or serious injury.
A potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
PACKAGE COMPONENTS
Chilled Water TankQuick Connect Elbows (3)
White Tubing - 4'
Blue Tubing - 4'
Cold Only Faucet
Rubber O-Ring
Hex Nut
Semi-circular Mounting Plate
Hex Tool
CWT-00 C1100
“Y” Quick Connector
3