Filter
Top Products
Page 5 of 8PE10P-X-X-A0S
PARTS LIST / PE10P-X-X-A0S FLUID SECTION
15
FOR THE
AIR MOTOR SECTION
SEE PAGES 6 & 7
Santoprene 8
7
PTFE
131 ,x
175 k
Figure 2
VIEW OF TWO PIECE PTFE DIAPHRAGM
29 ,
144 k
70 k
. TORQUE REQUIREMENTS ,
LUBRICATION / SEALANTS
Z Lubriplate FML-2 is a white food grade petroleum grease.
k Apply Lubriplate FML-2 grease to all “O” rings, “U”
cups & mating parts.
x Apply Loctite 242 to threads at assembly.
U Apply anti-seize compound to threads and bolt and
nut flange headswhich contact pump case when
using stainless steel fasteners.
s Apply PTFE tape to threads at assembly.
8
1
2
7
Torque Sequence
22
21
19
(6) Diaphragm washer, 25 - 30 ft lbs (33.9 - 40.7 Nm), lubricate
face with Lubriplate grease and apply Loctite
R
271 to
threads.
(26) Screws, 10 - 12 ft lbs (13.6 - 16.3 Nm).
(29) Nuts, 10 - 12 ft lbs (13.6 - 16.3 Nm).
(131) Screws, tighten to 11 - 14 ft lbs (14.9 - 19.0 Nm).
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
26 , U
22
19
21
144 k
70 k 69
180 k 5
7
10
6
4
9
5
3
6 ,
27 U
68
175 k
60 (models PE10P-FXS-XXX-A0S)
60 (models PE10P-AXS-XXX-A0S
and PE10P-B
XS-XXX-A0S)
26 , U
33
33
195
74 s
k 180
28
AUXILIARY VIEW A-A
A
A
60 (models PE10P-YXS-XXX-A0S)
61 (models PE10P-AXS-XXX-A0S
and PE10P-B
XS-XXX-A0S)
61 (models PE10P-YXS-XXX-A0S)
61 (models PE10P-FXS-XXX-A0S)
COLOR CODE
DIAPHRAGM BALL
MATERIAL COLOR COLOR
Hytrel Cream Cream
Nitrile Black Red (S)
Santoprene Tan Tan
Santoprene Green N / A
(Backup)
PTFE White White
Viton Yellow (-) Yellow (S)
(-) Dash (S)Dot
1 k