Filter
Top Products
Page 5 of 12PE03P-X-X-A0S (en)
PARTS LIST / PE03P-X-X-A0S FLUID SECTION
Figure 3
FOR THE
AIR MOTOR SECTION
SEE PAGES 6 & 7
COLOR CODE
DIAPHRAGM BALL
MATERIAL COLOR COLOR
Hytrel Cream Black (S)
Santoprene Tan Tan
PTFE White White
Viton Y ellow (S) Yellow (S)
(S)Dot
. TORQUE REQUIREMENTS ,
NOTE: DO NOT OVERTIGHTEN FASTENERS.
(6) Diaphragm nut 60 - 70 in. lbs (6.8 - 7.9 Nm).
(29) Nut 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then re-torque after initial run-in.
LUBRICATION / SEALANTS
` Apply pipe sealant to threads.
l Apply Lubriplate (94276) to all “O” rings, “U” cups and mating parts.
U Apply anti-seize compoundtothreads andbolt and nutflangeheads whichcontact pump
case when using stainless steel fasteners.
19 l
21
22
19 l
21
22
77
15
29 , U
63 `
43
6 ,751 l27 U
26 U
60 (PE03P-XDS-XXX-A0S,
PE03P-XK
S-XXX-A0S,
PE03P-XP
S-XXX-A0S)
60 (PE03P-XES-XXX-A0S,
PE03P-XL
S-XXX-A0S,
PE03P-XR
S-XXX-A0S)
29 ,
U
29 , U
61
8 Air Side Santoprene (tan)
7 Fluid Side PTFE (white)
View for PE03P-XXS-XXT-A0S (PTFE dia-
phragm) configuration only.
26 U
18
17
6
1
4
5
3
2
Torque Sequence
Chamfer (fluid inlet side)
Radius (ball side)
Stainless steel seat installation