Filter
Top Products
E2010 CCN 15262421
(800) 276-4658 D FAX (800) 266-7016
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET -- BRYAN, OHIO 43506
OPERATOR’S MANUAL
PE03P-X-X-A0S
RELEASED: 6-7-06
REVISED: 5-14-10
(REV. 04)
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
3/8” DIAPHRAGM PUMP
1:1 RATIO, NON-METALLIC
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump material options.
637428 for air section repair (see page 6).
637429-XX for fluid section repair (see page 4).
PUMP DATA
Models see Model Description Chart for “-XXX”.............
Pump Type Air Operated Double Diaphragm..........
Material see Model Description Chart.............
Weight PE03P-XD
S-XXX-A0S 3.74 lbs (1.70 kgs)... ...
PE03P-XE
S-XXX-A0S 3.84 lbs (1.74 kgs)...
PE03P-XK
S-XXX-A0S 4.08 lbs (1.85 kgs)...
PE03P-XL
S-XXX-A0S 4.20 lbs (1.91 kgs)...
PE03P-XP
S-XXX-A0S 3.02 lbs (1.37 kgs)...
PE03P-XR
S-XXX-A0S 3.08 lbs (1.40 kgs)...
Maximum Air Inlet Pressure 100 p.s.i.g. (6.9 bar).........
Maximum Material Inlet Pressure 10 p.s.i.g. (0.69 bar).....
Maximum Outlet Pressure 100 p.s.i.g. (6.9 bar)..........
Air Consumption @ 40 p.s.i. 1 c.f.m. / gallon (approx.).........
Maximum Flow Rate
(flooded inlet) 10.6 g.p.m. (40.1 l.p.m.).....
Displacement / Cycle @ 100 p.s.i. 0.022 gallons (0.083 lit.)....
Maximum Particle Size 1/16” dia. (1.6 mm)............
Maximum Temperature Limits (diaphragm / ball / seat material)
Acetal 10_ to 180_ F(-12to82_ C).................
HytrelR -20_ to 150_ F(-29_ to 66_ C)...............
Polypropylene 35_ to 175_ F(2_ to 79_ C)...........
KynarR PVDF 10_ to 200_ F(-12to93_ C)...........
SantopreneR -40_ to 225_ F(-40_ to 107_ C)...........
PTFE 40_ to 225_ F(4_ to 107_ C).................
VitonR -40_ to 350_ F(-40_ to 177_ C)................
Groundable Models PE03P-XD
S-XXX-A0S...............
PE03P-XE
S-XXX-A0S
Dimensional Data see page 8................
Noise Level @ 70 p.s.i., 60 c.p.m. 72.7 db(A)
.....
The pump sound pressure levels published here have been updated to an Equivalent
Continuous Sound Level (L
Aeq
) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-
ROP S5.1 using four microphone locations.
NOTICE: Allpossible options areshown inthe charthowever certain com-
binations may not be recommended, consult a representative or the fac-
tory if you have questions concerning availability.
Figure 1
MODEL DESCRIPTION CHART
PE03 P -X X S -X X X -A0S
PE03P-ARS-S X X -A0S
637429 - X X
DiaphragmBall
FLUID SECTION SERVICE KIT SELECTION
EXAMPLE: Model # PE03P-ARS-SAA-A0S
Fluid Section Service Kit # 637429-AA
Seat Material
D - Acetal P - Polypropylene
K - Kynar PVDF S - Stainless Steel
Diaphragm Material
A - Santoprene T - PTFE / Santoprene
C - Hytrel V - Viton
Ball Material
A - Santoprene T - PTFE
C - Hytrel V - Viton
S - Stainless Steel
Hardware Material
S - Stainless Steel
Fluid Caps / Manifold Material
D - Groundable Acetal (single port)
E - Groundable Acetal (multiple port)
K - Kynar PVDF (single port)
L - Kynar PVDF (multiple port)
P - Polypropylene (single port)
R - Polypropylene (multiple port)
Fluid Connection
A - 3/8 - 18 N.P.T.F. - 1
B - Rp 3/8 (3/8 - 19 BSP)
Center Section Material
P - Polypropylene
www.ingersollrandproducts.com