Filter
Top Products
MATERIAL CODE
[A] = Aluminum [Ha] = Hastelloy - C
[B] = Nitrile [K] = PVDF
[C] = Carbon Steel [SH] = Hard S’Steel
[Co] = Copper [SP] = Santoprene
[CI] = Cast Iron [SS] = Stainless Steel
[E] = E.P.R. [T] = PTFE
[H] = Hytrel [V] = Viton
PD30X-X-BPage 4 of 8
PARTS LIST / PD30X-X-X-B( ) FLUID SECTION
FLUID SECTION SERVICE KITS (637303-XX)
L KITSINCLUDE: BALLS/ CONE CHECKS(SeeBallor ConeCheckOption,refer to -XXin chart below),DIAPHRAGMS(See DiaphragmOption, referto -XXin chart below),
and items; 3, 19, 70, 144, 175, 196, (listed below) plus (174) and 94276 Lubriplate FML-2 grease (page 6).
SEAT OPTIONS PD30X-XXX-XXX-B( ) BALL OPTIONS PD30X-XXX-XXX-B( )
“21”
L “22” (3-1/4” dia.) L “19”
-XXX Seat Qty [Mtl] -XXX Seat Qty [Mtl] -XXX Ball Qty [Mtl] “O” Ring Qty [Mtl]
-AXX 94104 -A (4) [SP] -HXX 94114 (4) [SH] -X AX 94103-A (4) [SP] 94115 (4) [E]
-CXX 94104 -C (4) [H] -KXX 94621 -K (4) [K] -XCX 94103 -C (4) [H] Y327-350 (4) [V]
-EXX 95678 (4 ) [C] -LXX 94939 (4) [Ha] -XGX 94103-G (4) [B] Y325-350 (4) [B]
-FXX 95674 (4) [A] -SXX 94113 (4) [SS] -X TX 94103-T (4) [T] Y328-350 (4) [T]
-GXX 94104-G (4) [B] -XVX 94103-V (4) [V] Y327-350 (4) [V]
NOTE: Seat options PD30X-XXX-AXX-B, -CXX -B and -GXX-B do not require item 19 “O” ring.
CONE CHECK OPTIONS
PD30X-XXX-0X
X-B( )
DIAPHRAGM OPTIONS
PD30X-XXX-XXX
-B( )
L “41”
L SERVICE KIT L “7” L “8” L “3”
-0XX
Cone
Check Qty [Mtl] -XXX
-XX = (Ball)
-XX = (Diaphragm) Diaphragm Qty [Mtl] Diaphragm Qty [Mtl] “O” Ring Qty [Mtl]
-0JX 95672-2 (4) [B] -XXA 637303 -XA 94091-A (2) [SP] ----- --- --- Y328-210 (2) [T]
-0KX 95672-5 (4) [E] -XXC 637303-XC 94091-C (2) [H] ----- --- --- Y327-210 (2) [V]
-0LX 95672-3 (4) [V] -XXG 637303-XG 94091-G (2) [B] ----- --- --- Y328-210 (2) [T]
-XXT 637303-XT 94090-T (2) [T] 94110-A (2) [SP] Y328-210 (2) [T]
-XXV 637303-XV 95345 (2) [V] ----- --- --- Y327-210 (2) [V]
CENTER SECTION PART OPTIONS PD30X-XXX-XXX-B( )
PD30A-X-X-B( ) PD30S-X-X-B( )
Item Description (size) Qty Part No. [Mtl] Part No. [Mtl]
5 Backup Washer (2) 94831-1 [C] 94831-2 [SS]
68 Air Cap (1) 94030-1 [A] 94031-1 [SS]
69 Air Cap (1) 94030-2 [A] 94031-2 [SS]
126 Pipe Plug (1/4 - 18 N.P.T. x 7/16”) (2) ----- --- Y17-51 -S [SS]
Ln175 “O” Ring (3/32” x 1” o.d.) (2) Y325-117 [B] ----- ---
Ln (3/32” x 1-1/16” o.d.) (2) ----- --- Y325-118 [B]
181 Roll Pin (5/32” o.d. x 3/4” long) (4) ----- --- Y178-56 -S [SS]
MANIFOLD THREAD / FLUID CAP MATERIAL OPTIONS PD30X-XXX-XXX- B( )
PD30X-XAX-X-B( ) PD30X-XCX-X-B( ) PD30X-XHX-X-B( ) PD30X-XSX-X-B( )
Item Description (size) Qty Part No. [Mtl] Part No. [Mtl] Part No. [Mtl] Part No. [Mtl]
6 Fluid Side Washer (2) 94802 [A] 94803 [SS] 94947 [Ha] 94803 [SS]
9 Washer (3/16” i.d. x 2” o.d. x 5/32”) (2) Y13-12-T [SS] Y13-12-T [SS] 94949 [H a] Y13-12-T [SS]
14 Cap Screw (3/4” - 16 x 3-1/4”) (2) Y5-134 -T [SS] Y5-134-T [SS] 94948 [Ha] Y5-134-T [SS]
15 Fluid Cap (2) 94024 [A] 94106 [CI] 94693 [Ha] 94107 [SS]
32 Leg (PD30A-XXX-XXX-B) (2) ----- --- 94701-1 [C] N/A N/A 94703-1 [C]
(PD30S-XXX-XXX-B) (2) ----- --- 94701-2 [SS] 94703-2 [SS] 94703-2 [SS]
60 Inlet Manifold (1) 94699-[u] [A] 94305-[u] [CI] 94691-[u] [Ha] 94216-[u] [SS]
61 Outlet Manifold (1) 94700-[u] [A] 94702-[u] [CI] 94809-[u] [Ha] 94704-[u] [SS]
u For N.P.T.F. thread models (PD30X-AXX-XXX-B), use “-1” For BSP thread models (PD30X-BXX-XXX-B), use “-2”.
EXTERNAL HARDWARE OPTION PD30X-XXX-XXX-B( ) PD30X-XXX-0XX-B and -0XX-B03 only
PD30X-XXP-X-B PD30X-XXS -X-B Item Description (size) Qty Part No. [Mtl]
Item Description (size) Qty Part No. [Mtl] Part No. [Mtl]
78 Washer (1 -3/4” i.d. x 4-3/4” o.d.) (4) 95700 [SS]
26 Screw (M12x1.75-6gx45mm) (12) 94412-1 [C] 94412-2 [SS] 79 Washer (2.800” i.d. x 4-3/4” o.d.) (4) 95701 [SS]
27 Screw (M12x1.75-6gx60mm) (16) 94991-1 [C] 94991 [SS]
29 Nut (M12x1.75-6g) (16) 95053-1 [C] 95053 [SS]
COMMON PARTS
Item Description (size) Qty Part No. [Mtl] Item Description (size) Qty Part No. [Mtl]
1 Rod (1) 94984 [C]
43 Ground Lug (see page 7) (1) 93004 [Co]
Ln70 Gasket (2) 94100 [B]
131 Screw (M10 x 1.5 - 6g x 120 mm) (4) 94531 [C]
Ln144 “U” Cup (3/16” x 1-3/8” o.d.) (2) Y186-51 [B]
n 180 Gasket (0.406” i.d. x 0.031” thick) (4) 94098 [Co]
L 196 Cushion (2) 94631 [SP]
V “Smart Parts” keep these items on hand in addition to the Service Kits for fast repair and reduction of down time.