Filter
Top Products
26
ZIPPERS AND PIPING
Set the machine as illustrated. (1)
The zipper foot can be snapped onto the right or left, depending on
which side of the foot you are going to place against the zipper or
piping. (2)
To sew past the zipper pull, lower the needle into the fabric, raise
the presser foot and push the zipper pull behind the presser foot.
Lower the foot and continue to sew.
The zipper foot is also used to sew cord into a bias strip to form a
piping and to sew the piping into a seam. (3)
Set stitch length control between “1” - “4” (according to thickness of
fabric).
Stitch length dial