Filter
Top Products
This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and
UL1594
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always
be followed, including the following:
Read all instructions before using this household sewing machine.
DANGER - To reduce the risk of electric
shock:
• A sewing machine should never be left unattended when plugged in.
Always unplug this sewing machine from the electric outlet immediately
after using and before cleaning.
• Always unplug before relamping. Replace bulb with same type rated
10W (110V-120V), 15W (220-240V).
WARNING - To reduce the risk of burns, fi re,
electric shock, or injury to persons:
• Do not allow to be used as a toy. Close attention is necessary when
this sewing machine is used by or near children and infi rm persons.
• Use this sewing machine only for its intended use as described in this
manual. Use only attachments recommended by the manufacturer as
contained in this manual.
• Never operate this sewing machine if it has a damaged cord or
plug, if it is not working properly, if it has been dropped or damaged,
or dropped into water. Return the sewing machine to the nearest
authorized dealer or service center for examination, repair, electrical or
mechanical adjustment.
• Never operate the sewing machine with any air openings blocked.
Keep ventilation openings of the sewing machine and foot controller
free from the accumulation of lint, dust, and loose cloth.
• Keep fi ngers away from all moving parts. Special care is required
around the sewing machine needle.
• Always use the proper needle plate. The wrong plate can cause the
needle to break.
• Do not use bent needles.
• Do not pull or push fabric while stitching. It may defl ect the needle
causing it to break.
• Switch the sewing machine off (“0”) when making any adjustment in
the needle area, such as threading needle, changing needle, threading
bobbin, or changing presser foot, etc.
• Always unplug sewing machine from the electrical outlet when
removing covers, lubricating, or when making any other user servicing
adjustments mentioned in the instruction manual.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or
where oxygen is being administrated.
• To disconnect, turn all controls to the off (“0”) position, then remove
plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the
cord.
SAVE THESE INSTRUCTIONS