Hunter,R.F EX5 4RJ Stove User Manual


 
1
PLEASE READ THESE INSTRUCTIONS CAREFULLY
It is important that your stove is correctly installed and operated, as
Hunter Stoves Limited cannot accept responsibility for any fault
arising from incorrect installation of this product.
IMPORTANT POINTS FOR THE USER
1. Read all instructions carefully before attempting to operate this appliance.
2. If you have any doubts about the suitability of your chimney for the appliance
please consult your local Hunter Stoves stockist/dealer. The chimney must be
given a precautionary sweep before connection to the appliance.
3. It is required by law that any appliance using gas is installed by a CORGI
registered fitter in conjunction with these instructions and in accordance with the
rules in force.
4. Fires can be dangerous, always use a fireguard in the presence of children, the
elderly or the infirmed.
5. All outer surfaces of the appliance are considered to be working surfaces except
for the gas control knob and valve cover flap.
6. It should be noted that heat given off from this appliance might affect articles
placed close to it. Curtains should not be positioned above the appliance or
within 300mm of the sides. Caution should also be taken sighting the appliance
near to ‘embossed’ type wallpapers.
7. Although the appliance is referred to as a stove it is clearly not designed as a
‘cooker’ or a ‘dryer’. It only has designated CE approval for use as a room heater
with a decorative fuel effect.
8. Never attempt to light the appliance if the glass panel is damaged.
9. Never use this appliance with the door open or removed.
NOTE:
During the first few uses, the appliance may emit an unpleasant odour. This is
the paint curing. It is non-toxic, but for your comfort you may wish to ventilate
the room by opening the doors and windows.
The CORGI REGISTERED ENGINEER commissioned to install this
appliance is wholly responsible for deciding the suitability of any flue
arrangement to operate in conjunction with this gas appliance.