Filter
Top Products
13
42890-01 • 02/18/10 • Hunter Fan Company
Step 7-21 - 7-22
Cap
Finial
Rod
Rod
Finial
Plug
Connector
Steps 7-15 - 7-17
Steps 7-18 - 7-21
Chain
Uninstalling the Light Fixture
7-11. Loosen and remove nial from threaded rod.
7-12. Remove Light kit from lower switch housing.
7-13. Disconnect the plug connector.
7-14. Place extra cover over the threaded rod.
7-15. Place breakaway connector on the end of the pull
chain
7-16. Place breakaway connector inside of the nial and
push pull chain back inside of the threaded rod.
7-17. Tighten nial on threaded rod.
Note: e breakaway connector should stop the pull
chain from coming through the nial.
7 • Completing Your Installation With or Without a Bowl Light Fixture