Filter
Top Products
10
45062-01 • 07/01/09 • Hunter Fan Company
Your Hunter fan comes with an integrated light xture assembly.
WARNING: Use only the light xture supplied with this fan model.
7-1. To attach the light kit top housing, partially install two
housing assembly screws into the light kit mounting plate.
7-2. Connect the upper plug connector from the motor to the
lower plug connector in the light kit.
Note: Both plug connectors are polarized and will only t
together one way. Make sure the connectors are properly
aligned before connecting them. Incorrect connection could
cause improper operation and damage to the product.
7-3. Align the keyhole slots in the housing with the housing
assembly screws.
7-4. Turn the light kit top housing counterclockwise until the
housing assembly screws are rmly situated in the narrow
ends of the keyhole slots. Install the remaining screw into the
housing. Tighten all three screws rmly.
CAUTION: Make sure the light kit top housing is securely
attached to the light kit mounting plate. Failure to properly
attach and tighten all three assembly screws could result in the
light kit top housing and light xture falling.
Housing
Assembly
Screw
Light Kit
Mounting
Plate
Light
Kit Top
Housing
Step 7-4
7 • Completing Your Installation With a Light Fixture