Filter
Top Products
12
Installing the Glass Bowl
1. First install two B10 candelabra bulbs (60 Watt Maximum) into the
sockets.
2. Attach the extra pull chain (included) to the fan pull chain using the
plastic breakaway connector. (You may find the plastic breakaway
connector on the end of the extra chain.)
3. read the fan pull chain through the hole in the metal disk. en,
thread the fan pull chain through the hole in the center of the glass
bowl.
4. read the light pull chain through the hole in the center of the glass
bowl.
5. Place the cover plate up against
the glass bowl. Align the holes in
the cover plate and glass bowl.
6. read the fan pull chain and
light pull chain through the
appropriate holes.
7. read the light pull chain
through the finial and screw the
finial onto the threaded rod end
until tight.
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial
Breakaway
Connector
7 • Completing Your Installation With or Without a Light Fixture (Continued)
Hunter Fan Company 41931-01 • 04/14/07