Filter
Top Products
43533-01 05/28/2008
10
43533-01 05/28/2008
11
INSTALLATION continued
Figure 11a
Figure 11b
9) Position the Finial over the Glass Dome as shown in Figure 12, and twist it clockwise until
tight.
Figure 12 - Install Finial
Heater
Glass Dome
Glass
Finial
8) Position the Glass Dome under the Heater/Light Fixture as shown in Figure 11a. Then,
place the Glass Dome over the Heater/Light Fixture as shown in Figure 11b.
Install Glass Dome
OPERATION
1) Restore power at the breaker.
2) Install the 12V alkaline battery (included) into the Transmitter.
3) Use the Heater On/Off buttons on the Transmitter to turn the Heater on and off. Use the
Light On/Off buttons to turn the light on and off. See Figure 13.
Technical Support
If you have any additional questions or problems with your Illumi-Heat please call
1-888-830-1326 (in the United States) or 1-866-268-1936 (in Canada), or contact us over
the internet at www.hunterfan.com.
OFF
OFF
ON
ON
HEATER
LIGHT
Figure 13 - Transmitter Buttons
Heater Off
Heater On
Light Off Light On
4) Mount the Transmitter Holder over the Illumi-Heat’s wall switch using the the existing wall
plate screws. See Figure 14.
5) The Transmitter can be placed in the Transmitter Holder for convenience or safekeeping.
Figure 14 - Installing Transmitter Holder