Filter
Top Products
© 2003 Hunter Fan Company 3 41558-01 3-6-2003
Pipe
Globe
Metal Disk
Bulb
Socket
Light
Switch Pull
Chain
Cover Plate
Finial
Fan Switch
Pull Chain
Hunter Fan Company
2500 Frisco Avenue
Memphis, Tennessee 38125
United States of America
Figure 7 - Aurora Fixtures
Installing Globes and Bulbs
Thread the fan switch pull chain through the
grommetted hole in the light fixture bracket. Unfasten
the extra chain looped through the hole in the in the
lower mounting cap and attach it to the fan switch
pull chain. Repeat for light switch pull chain.
Refer to Figures 5, 6 and 7.
1. Install bulbs. Use 60W Max, A-15 bulbs.
2. Thread the fan switch pull chain through the hole in
the metal disk.
3. Place globe on pipe until flush against metal disk.
4. Thread the light switch pull chain through the large
center opening of the globe.
5. Thread the fan switch pull chain through the small
center opening in the globe.
6. Place the cover plate up against the underside of
the globe. Pass light and fan switch pull chains
through the appropriate holes.
7. Thread the light switch pull chain through the
finial and screw the cap onto the pipe end until
tight.
Figure 6 - Attaching Fan Switch Pull Chain Extension
Figure 5 - Threading Fan Switch Pull Chain through
Grommet
Grommetted
Hole
Lower Mounting Cap
Extra Chains
Hole in Lower
Mounting Cap