Filter
Top Products
STORAGE TROUBLESHOOTING
1. Disassemble and clean fan before
storing.
2. Keep the original packaging for the
purpose of storing the fan.
3. ALWAYS store the fan in a dry
place.
4. NEVER store the fan while it is still
plugged in.
5. NEVER wrap the cord tightly
around the fan.
6. DO NOT put any stress on the cord
where it enters the fan, as it could
cause the cord to break.
PROBLEM
• Fan will not oscillate.
SOLUTION
• Push down on knob on top of motor
housing to activate oscillation.
PROBLEM
• Can not adjust the angle of the fan.
SOLUTION
• Loosen the screw on the side of the
fan neck. Adjust to the desired angle
and tighten the screw.
If you have tried these troubleshooting
solutions and still have trouble, call 01-
901-743-1360 (USA) or visit our Web site
at http://www.hunterfan.com.
44242-01 03/18/2009 7