Filter
Top Products
MAINTENANCE
This fan is permanently lubricated and
will not require additional lubrication
(oil) for the life of the fan. This fan
requires little maintenance and contains
no user serviceable parts. DO NOT try to
x it yourself. Contact qualied service
personnel if servicing is needed.
TO CLEAN:
1. Before cleaning, turn fan o and
unplug from electrical outlet. Wipe
o excess dust with a lintfree cloth.
2. To ensure adequate air circulation
to the motor, keep vents located at
the rear of the motor housing free
from dust accumulation. A vacuum
cleaner hose can be used to clean
these vents.
3. DO NOT immerse the fan in water
or any other liquid.
CLEANING GRILL AND BLADE:
1. Turn the fan o and unplug from
the electrical outlet.
2. Disassemble grills by carefully
removing the screw on the bottom
of the grill and by squeezing the
ring to remove the hook from the
hole.
See Figure 4.
3. Disassemble blades by carefully
removing the blade screw
behind the blades. The blades
should slide o.
4. Grills and blades may be cleaned
with mild soap and water.
5. Use a soft, slightly damp cloth to
wipe the remaining fan parts.
6. DO NOT allow water or any
other liquid to get into the motor
housing or base.
7. Reassemble the fan after blades
and grills have dried completely.
First, replace the blades. When
replacing the blade screw, you
should feel some resistance as
the screw engages the bar. Next,
align the grills, replace the ring,
place the hook in the hole and
replace the screw.
8. DO NOT plug fan into an electrical
outlet until it has been fully
reassembled.
6 44242-01 03/18/2009
FIGURE 4
Front Grill
Blade
Screw
Back Grill
Handle
Oscillation Knob
Motor
Housing
Up/Down
Adjustment
Screw
Ring
Blade
Power/Speed Control Switch
Base