Filter
Top Products
[6]
44801-01 02/07/2008
[7]
44801-01 02/07/2008
ENGLISH
ENGLISH
maintenance
This fan is permanently lubricated
and will not require additional lubri-
cation (oil) for the life of the fan.
This fan requires little maintenance
and contains no user serviceable
parts. DO NOT try to x it yourself.
Contact qualied service personnel
if servicing is needed.
TO CLEAN:
1. Before cleaning, turn fan off
and unplug from electrical out-
let. Wipe off excess dust with a
lintfree cloth.
2. To ensure adequate air circula-
tion to the motor, keep vents
located at the rear of the motor
housing free from dust accumu-
lation. A vacuum cleaner hose
can be used to clean these
vents.
3. DO NOT immerse the fan in
water or any other liquid.
CLEANING GRILL AND BLADE:
1. Turn the fan off and unplug
from the electrical outlet.
2. Disassemble grills by carefully
removing the screw on the bot-
tom of the ring. See Figure 4.
3. Remove the ring, lower deco-
rative peice (only on 9103x &
9703x models), and front grill.
See Figure 5.
4. Grills and blades may be
cleaned with mild soap and wa-
ter.
5. Use a soft, slightly damp cloth
to wipe the remaining fan
parts.
6. DO NOT allow water or any
other liquid to get into the mo-
tor housing or base.
7. Reassemble the fan after
blades and grills have dried
completely. Align the grills, re-
place the ring, replace the dec-
orative piece (only on 9103x &
9703x models) and replace the
screw.
NOTE: To replace the decora-
tive piece, partially install the
screw, then hold the decorative
piece between the open ends
of the ring. Finish tightening
the screw.
8. DO NOT plug fan into an elec-
trical outlet until it has been
fully reassembled.
FIGurE 4
Screw
Decorative Piece
(Only on 9103x & 9703x
models)
Ring
Grill
Decorative Piece
(Only on 9103x & 9703x models)
FIGurE 5
Ring
Front
Grill
Back Grill
Decorative Piece
(Only on 9103x & 9703x
models)
Decorative Piece
(Only on 9103x & 9703x
models)