Filter
Top Products
6
44096-01 20130220 ©2013 Hunter Fan Co.
OPERATING INSTRUCTIONS
FAN OPERATION (Figure 4.)
Speed Control Knob
SYMBOL FUNCTION
0 Off
1 Low
2 Medium
3 High
• Turning the speed control knob to “0”
will set the fan to the “OFF” position.
• Set the Fan Base on a dry, level
surface.
• Plug cord into any standard 120
volt AC outlet. Make sure the Speed
Control Switch is in the ‘0’ (Off) position.
• Adjust the speed by turning the Speed Control Switch to 1, 2 or 3
FAN ORIENTATION
Wind orientation can be adjusted manually as follows (please refer to Figure 5):
• A: adjust to 180° angle.
• B: adjust to 90° angle.
• C: adjust to 90° angle.
Figure 5.
Speed Control Knob (Lower Fan)
Speed Control Knob (Upper Fan)
Figure 4.