Hunter Fan 90438 Fan User Manual


 
7
BASE ASSEMBLY
Figure 7
Figure 6
Figure 8
1. Remove and height adjustment knob from telescoping
pole by turning it counter clockwise. Also remove the
cord clamp. Slide the base trim ring onto the pole.
Reinstall the height adjustment knob and cord clamp.
Figure 6.
2. Remove the L-shaped screw from the telescoping
pole by turning it counter clockwise. Figure 7.
3. Insert the telescoping pole into the top of the base.
Install the L-shaped screw into the threaded hole in
the bottom of the pole to secure the pole to the base.
Figure 7.
4. Tip the base back upright.
5. Grasp the telescoping pole firmly and twist the
adjustment knob counter clockwise to loosen. Figure 9.
6. Raise the inner pole to maximum height and tighten
the adjustment knob by twisting clockwise until
secure. Figure 9.
Figure 9
UNPACKING
As you unpack the fan, save the carton and packing
materials in case you want to move or ship the unit in the
future. Carefully remove all items from the box.
NOTE: It is best to have someone hold the box while
you lift the fan and the protective packaging out of the
carton. Make sure all shipping materials are removed
from fan before operating.
Base
L-shaped
Screw
Telescoping
Pole
Telescoping
Pole
Base Trim
Ring
Height
Adjustment
Knob
Adjustment
Knob
Inner Pole
Screw