Filter
Top Products
9
Figure 14
Figure 13
Figure 15
GRILL ASSEMBLY (CONT.)
Front Grill
Hunter Logo
Grill
Ring
Screw
Screw
Back Grill
6. Remove the grill ring from the front grill by loosening
the screw holding it.
7. Place the front grill against the back grill so that the
Hunter logo faces right side up and push together until
the tabs on the grills hold them together. Figure 13.
8. Expand the grill ring by loosening the screw that
secures it. Figure 14.
9. Slide the grill ring over both front and back grills
turning the ring so that the screw that secures it, is
on the bottom. Figure 14.
10. Tighten the screw to secure the grill ring over both
the front and back grill. Figure 15.