Filter
Top Products
9
Installation & Operation
42727-01
Figure 6
Horizontal Surface Use
1. Tilt the fan so the top of the fan clears the Downrod Cup.
2. Lift the fan so the Split Sleeve clears the Downrod Cup. Move
the Leg Adjust Lever toward the front of the fan, then tilt back
the Adjustable Leg. See Figure 2.
3. Remove your Garage Fan from the Downrod.
4. Turn your Garage Fan over and let it rest on the horizontal surface
of your choosing.
5. Tilt the fan so the Speed Control Switch is on top. See Figure
6.
6. Use the Speed Control Switch to select your fan’s speed. See
Figure 4.
7. FOR MODELS WITH THE SNAKE LAMP - Position the exible
Snake Lamp to shed light on your work area. Use the Snake
Lamp Switch to to turn the lamp on and off. See Figure 5.
8. While your Garage Fan is on a Horizontal Surface, you can tilt it
to direct the airow.
Speed Control
Switch