Filter
Top Products
7
Installation & Operation
42727-01
Figure 3a
Figure 3b
Figure 3c
Stationary
Leg
4. Grasp the Stationary Leg and position the Stationary Leg Split
Sleeve onto the Downrod, over the Downrod Cup. See Figure 3a.
While maintaining your grasp on the Stationary Leg, bring the Ad-
justable Leg forward, positioning the Adjustable Leg Split Sleeve
around the Downrod Cup. See Figure 3b. Lower the Split Sleeve
into the Downrod Cup. See Figure 3c
5. FOR MODELS WITH THE SNAKE LAMP - Open the Snake Lamp
Cage. Install an R20 50W max. light bulb (not supplied). NOTE:
Use ONLY an R20 50W max. light bulb in your Garage Fan Snake
Lamp. Shut the Snake Lamp Cage.
6. Plug your fan’s Power Cord into a 120V 60Hz outlet.