Hunter Fan 90121A Fan User Manual


 
4 41973-01 03/08/2006
ENGLISH
This appliance is for household use
only and may be plugged into any
120-volt AC electrical outlet (or-
dinary household current). DO NOT
use any other type of outlet.
This unit is suitable for ground-
ed receptacle use only.
The power cord has a grounded
plug as shown in Figure 1, and must
be used with an electrical outlet that
can accommodate the grounding
pin. If your electrical outlet can not
accommodate the grounding pin,
then you must purchase and install
one of the two types of adapters
shown in Figure 2. NOTE: The adapt-
ers ARE NOT supplied with this fan.
Read, follow, and save the instruc-
tions that are included with the
adapter you choose. Do not use an
adapter if your electrical outlet can
accommodate the grounding pin.
.
groundIng InStruCtIonS
FIGURE 2FIGURE 1
Grounded
Plug
Grounding Pin
Grounded Outlet
Box Cover
Grounded Outlet
Box Cover
Metal
Screw
Adapter
Grounding
Means
LINE CORD SAFETY TIPS
1. NEVER pull or yank on the cord
or the appliance.
2. To insert plug, grasp it firmly
and guide it into the outlet.
3. To disconnect the appliance,
grasp the plug and remove it
from the outlet.
4. Before each use, inspect the line
cord for cuts and/or abrasion
marks. If any are found, the ap-
pliance should be serviced and
the line cord replaced. Please
return it to our Service Depart-
ment or to an authorized service
representative.
5. NEVER wrap the cord tightly
around the appliance, as this
could place undue stress on the
cord where it enters the appli-
ance and could cause it to fray
and break.
6. DO NOT operate appliance if
the line cord shows any dam-
age, if the appliance works
intermittently or stops working
entirely.