Filter
Top Products
42936-01 10/17/2007
8
Mark position of screws by using holes as a template.
Drill a pilot hole at the TOP of each outline.
B4
1/16” bit
B5
Insert mounting screws, leaving space between the
screw head and the joist. (Screws are supplied.)
Attach the rails onto the screws.
B6
B7
B8
Tighten screws.
Run the power supply wire through the strain relief, leav-
ing 3” between the end of the wire and the strain relief.
Tighten the strain relief around the wire.
3”
B9