Filter
Top Products
42936-01 10/17/2007
6
A1
Section A - New Construction - attaching to joist
Drive mounting screws (supplied) into joist or framing.Position the correct depth mark at the bottom edge of
the joist based upon the the thickness of your sheetrock.
5/8
1/2
5/8
1/2
A2
Pop out a wiring access slug.
OR
Install the wiring and the strain relief into the wiring
access hole you made earlier.
A5
Run the power supply wire through the strain relief, leav-
ing 3” between the end of the wire and the strain relief.
Tighten the strain relief around the wire.
A3
A5
3”
A4