Filter
Top Products
42936-01 10/17/2007
13
Connect 4” duct and vent to the outside. Use duct tape to
secure joints. If ducting does not fit securely, an adapter
may need to be purchased.
Install the wiring and the strain relief into the wiring
access hole you made earlier.
Position the bottom edge of the housing flush with the
sheetrock.
Move the housing into the ceiling.
D5
D6
D7
5/8
1/2
5/8
1/2
D8
Screw mounting screws into joist or framing.
Go to
Section E -
Final Installation
on page 14.
D9