Filter
Top Products
43044-01 03/05/2008
8
Mark position of screws by using holes as a template.
Drill a pilot hole at the TOP of each outline.
B4
1/16” bit
B5
Insert mounting screws, leaving space between the screw
head and the joist. (Screws are supplied.)
Attach the rails onto the screws.
B6
B7
B8
Tighten screws.
Run the power supply wire through the strain relief, leaving
3” between the end of the wire and the strain relief. Tighten
the strain relief around the wire.
3”
B9