Filter
Top Products
43044-01 03/05/2008
6
A1
Section A - New Construction - attaching to joist
Drive mounting screws (supplied) into joist or framing.Position the correct depth mark at the bottom edge of the
joist based upon the the thickness of your sheetrock.
5/8
1/2
5/8
1/2
A2
Pop out a wiring access slug.
OR
Install the wiring and the strain relief into the wiring access
hole you made earlier.
A5
Run the power supply wire through the strain relief, leaving
3” between the end of the wire and the strain relief. Tighten
the strain relief around the wire.
A3
3”
A4