Hunter Fan 47550 Thermostat User Manual


 
16-17
PROGRAMMING
Remove the mylar label covering the LCD display window before operating thermostat.
Setting Time and Day
HOUR
MIN
DAY
RETURN
EXAMPLE:
Set the
thermostat
to the
current time
of 9:43 a.m.
on
Saturday.
Refer to
Figure at
right.
During time and day setting mode, the temperature and program
displays will go blank.
Press and hold to rapid advance to the current hour. Tap to advance one
hour at a time. Note the AM / PM indicator, as the display will cycle
through 24 hours.
Press and hold to rapid advance to the current minute. Tap to advance
one minute at a time.
Tap to advance one day at a time.
When finished, press to return to the Normal time and temperature
display or wait 15 seconds for it to return to Normal mode automatically.
Initial display after power-up or reset. The LCD will show the information
when batteries are first installed, or after the Reset button is pressed. The
temperature will update after a few seconds.
M T W Th F Sa Su
AUTO COOL HEAT
TEMP
12
:
00
SET TEMP
ݗݘݙݚ
°
C
H
°
C
H
AM
PM
72
MTWThFSa Su
AUTO COOL HEAT
TEMP
89
:
43
SET TEMP
ݗݘݙݚ
°
C
H
°
C
H
AM
PM
88
MTWThFSa Su
AUTO COOL HEAT
TEMP
89
:
43
SET TEMP
ݗݘݙݚ
°
C
H
°
C
H
AM
PM
71