Hunter Fan 45006-0109 Fan User Manual


 
12
45006-01•09/26/07•HunterFanCompany
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Lower Switch
Housing
readedRod
Steps 7-7 – 7-14
Step 7-15 – 7-16
SwitchHousing
Cap
Plug Button
Uninstalling the Light Fixture
7-7. Removethelowerswitchhousingscrews,thenremovethelower
switch housing.
7-8. Touninstallthelightxture,disconnectthe9-pinplugconnectors.
7-9. Youmustremovethewiringharnessanditscomponentsfromthe
integrated light fixture. You must then install the wiring harness
into the empty switch housing included with the fan.
7-10. Locatethereversingswitchandcarefullyremovethetwoscrews
holding the reversing switch to the lower switch housing. en,
remove the reversing switch from the housing.
7-11. Removethepatentedbreakawayconnectorfromtheendofthe
fan pull chain. Carefully loosen the bellmouth nut from the pull
chain and remove the pull chain switch from the light fixture
housing.
7-12. Locateandcarefullyremovethetwocapacitors.
7-13. Unplugthetwo-pinwireconnectorwithonewhitewireand
a black with white striped wire coming from the multi-wire
connector.
7-14. Youhavenowdisconnectedthewiringharnessandits
components and are ready to install them into the empty switch
housing. (e light switch remains in the light assembly housing.)
7-15. Insertthepullchainandfanpullchainswitchthroughtheround
opening on the side of the empty switch housing. read the
bellmouth nut over the pull chain and hand tighten the bellmouth
nut.
7-16. Reattachthebreakawayconnectortothepullchain.
7-17. Insertthereversingswitchintothesquareholeonthesideofthe
switch housing. Install and tighten the two screws you removed
previously from the other switch housing.
7-18. Carefullyplacethecapacitorsintheswitchhousing.
7-13. Installtheswitchhousingcapandplugbuttontothelowerswitch
housing.
7-14. Re-attachthe9-pinplugandreinstallthelowerswitchhousing
screws.
7-15. Onceyouhaveuninstalledthelightxture,continuewithstep8-1.
Lower Switch
Housing
Screw
Bracket
Assembly
Screws
Install bulb(s) & Glass