Hunter Fan 45006-0109 Fan User Manual


  Open as PDF
of 16
 
9
45006-01•09/26/07•HunterFanCompany
5-1. Partially install two canopy screws (about 2 full turns) in the
hanger bracket.
5-2.Raisethecanopyoverthehangerbracket.Alignpartiallyinstalled
screws with key slots in canopy.
5-3. Twist canopy clockwise to secure.
5-4. Install third & fourth canopy screw in round hole on canopy.
Securely tighten all four screws.
5-5. Usingbothhands,pushthecanopytrimringuptothetopofthe
canopy.
5-6. Twist canopy trim ring clockwise to secure the canopy.
Should you need to remove the canopy
trim ring, follow these steps:
1. Twist canopy trim ring counter
clockwise until it releases from
canopy.
Steps 5-1 – 5-2
Canopy Trim
Ring
Canopy
HangerBracket
Step 5-3
Canopy
Screw
Step 5-4
Step 5-5
5 • Installing the Canopy and Canopy Trim Ring
Install Bracket & Wiring
 previous next