Filter
Top Products
44040-01 • 03/24/2010
10
* The schedule time can be set in 15 minute increments, and remains the same for both
Heat and Cool programs.
* The scheduled temperature can be set in increments of 1°F (1°C).
* After 10 minute without a key press, the thermostat will return to the home display
screen.
* When setting the schedule time, note the AM / PM indicator.
* At any stage during your scheduling, you can use the
Back
or
Next
buttons to move
forward or backwards through the steps.
Home/
Done
will save any changes, even if you have
not scheduled or altered all settings.
* Arrows beside each schedule mode and beside heat/cool modes will indicate which
ones are active.
* A [Brackets] around a word in the message window at the top indicates it can be
pressed as a button.
* If the
?
shows up on the screen, pressing it will give you more information about
that step.
Read the scheduling section thoroughly to ensure you understand your scheduling options and
which will best t with your lifestyle. The following notes should help you with scheduling:
5
Scheduling
Scheduling Introduction