Filter
Top Products
44067-01 • 08/03/2012
30
Additional Features
There is no need to stand at the wall where the thermostat is mounted while
programming or changing settings. Simply remove the thermostat from the
wall and make the necessary changes in the comfort of a chair. You can also
set your programming and settings before you even install the thermostat.
Armchair Programming
To protect your system from cycling, system turning on and off rapidly,
your thermostat will prevent your system from turning back on for up to 4
minutes after it has been shut down.
System Protection
In situations where your thermostat may not seem to be operating properly
or if you just want to reset and start over, press and hold the
and
buttons for 3 seconds. This will restore the thermostat to factory condition.
Reset