12
42786-01 • 08/14/09 • Hunter Fan Company
Installing the Glass Bowl
7-13. First install B10 candelabra bulbs (60 Watt Maximum) into
the sockets.
7-14. Attach the extra pull chain (included) to the fan pull chain
using the plastic breakaway connector. (You may nd the
plastic breakaway connector on the end of the extra chain.)
7-15. read the fan pull chain (coming from the side of the light
kit) down through the closest hole in the metal disc. en,
thread the fan chain through the bottom of the glass bowl,
and nally through the grommet hole in the cover plate.
7-16. read the light pull chain (coming from the center of the
light kit) through the bottom of the glass bowl and the center
of the cover plate.
7-17. Place the cover plate up against the glass bowl. Align the holes
in the cover plate and glass bowl.
7-18. read the light pull chain through the center of the nial.
7-19. Screw the nial onto the threaded rod end until tight.
7-20. Attach the extra pull chain (included) to the light pull chain
using the plastic breakaway connector. (You may nd the
plastic breakaway connector on the end of the extra chain.)
7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Breakaway
Connector
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Disc
Fan Pull Chain
Light Pull Chain
Glass Bowl
readed Rod
Cover Plate
Finial
Note: In compliance with US federal energy
regulations, this ceiling fan contains a device
that restricts the light kit to a maximum of
190 Watts. Exceeding that limit or the marked
limit on this product may result in re hazard
or improper operation.
