Filter
Top Products
56
5. My heating or cooling will not turn on or off.
5 a. Check the Heat/Cool function switch to ensure it is set to
the desired position.
5 b. Wait. There may be as much as a 4-minute delay before
the system turns on or off to protect the compressor.
5 c. Check the circuit breakers and switches to ensure there is
power to the system.
5 d. Replace the batteries.
5 e. If applicable, make sure the furnace blower door is closed
properly.
5 f. If your system has 4 wires, ensure the jumper wire is
installed between the RC and RH terminals.
5 g. Check your system for proper wiring.
.............................................................................................
6. The display will come on, but it will not stay illuminated.
6 a. Replace batteries.
TROUBLESHOOTING