Filter
Top Products
19
ATTACHING THE THERMOSTAT
Lift the thermostat cover and set the SYSTEM switch to OFF and
the FAN switch to AUTO.
1. Fan option - Locate the HE/HG switch on the back of the
thermostat. Set the switch to HG (default) for gas furnace and oil
burners. Set the switch to HE for electric furnaces. (The switch
has no effect when the system is set to cooling mode.)
2. Recovery - Locate the
AUTO REcOvERY
switch on the back of the
thermostat. If you wish to use the Auto Recovery feature, verify
that the switch is in the ENABLE position. If you do not wish
to use this feature, simply change the switch to the DISABLE
position. See pages 44-45 for more information.
3. System type - Locate the
SYSTEM TYpE
switch on the
back of the thermostat. Select either STD (Standard) or HP
(Heat Pump) to match your system.
INSTALLING THE THERMOSTAT, CONT.