Filter
Top Products
11
42687-01 • 08/03/09 • Hunter Fan Company
Note: If you do not want to install the light xture, see
“Uninstalling the Light Fixture” on page 12.
7-5. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only t together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-6. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three #6-32 x 3/8” housing assembly screws. You will
need to rotate the blade irons out of the way for each screw.
Installing the Shades and Bulbs
7-7. Remove the plastic from each of the shades.
7-8. Install the shades.
7-9. Install three B10 candelabra bulbs light bulbs (40 Watt maximum
each).
Lower
Switch
Housing
Plug
Connector
Detail
Step 7-5
Step 7-6
Housing
Assembly
Screw
Plug
Connector
Light Bulb
Shade
Steps 7-8 – 7-9