12
42649-01 • 08/13/09 • Hunter Fan Company
8-1. e remote transmitter has individual buttons for turning the fan
o and on and controlling the light and fan speed.
8-2. For best operation, start the fan by pressing high, then select your
desired speed.
8-3. e light button turns the light on to full brightness. Push the
light button again to turn o the light.
8-4. e reversing switch reverses the direction of the fan.
8-5. Press the OFF button to turn the fan o.
8-6. is product includes one 12- volt type 23A, MN-21 battery for
use with the remote control transmitter. Please contact your local
battery recycliing center for proper battery disposal information.
8-7. You can mount the remote holder to any toggle switch plate with
the screws already in the switch plate. Or, you can simply mount
the remote holder on the wall.
Attention! Remove the battery from the remote control transmitter
if the product is to remain unused for an extended period of time.
To remove the battery, remove the back cover of the remote control
transmitter. Remove used batteries promptly.
Step 8-6
Fan Light
Fan Speed
High
Fan Speed
Medium
Fan Speed
Low
Fan O
Reversing Switch
Steps 8-1 – 8-5
Step 8-7
8 • Operating the Remote Control and Mounting the Holder
