11
42649-01 • 08/13/09 • Hunter Fan Company
Glass Bowl
Bulb
Installing the Glass Bowl
7-1. Partially install two screws in the upper light kit.
7-2. Align the keyholes in the upper light kit ring with
the partially installed screws and rotate to situate
the screws in the narrow ends of the keyholes.
7-3. Install the remaining screw into the upper light kit
ring and securely tighten all three screws.
7-4. Install included 18W CFL bulb.
7-5. Align the tabs in the globe assembly with the tabs
in the light kit ring, then lift the globe assembly
and rotate to engage the tabs. Make sure all tabs
are properly engaged before releasing the globe.
Steps 7-1 - 7-3
Steps 7-4 - 7-5
Screws
7 • Completing Your Installation With a Bowl Light Fixture
Note: In compliance with US federal energy regulations, this
ceiling fan contains a device that restricts the light
kit to a maximum of 190 Watts. Exceeding that limit
or the marked limit on this product may result in re
hazard or improper operation.
