3
41897-01 • 11/22/05 Hunter Fan Company
Mounting and Optional Accessories
Understanding Mounting
Hunter’s patented mounting system provides you maximum
installation exibility and ease. You can install your Hunter fan in
one of two ways, depending on your preference: Standard or Angle
mounting. Your fan may only be installed on ceilings 8 feet or higher.
If you want to install on a ceiling 8-10 feet high, follow section
2 • Assembling the Fan for Ceilings 8-10 Feet High on page 5.
If you want to install the fan on a ceiling 10 feet or higher, follow section
3 • Assembling the Fan for Ceilings 10 Feet or Higher on page 6.
Considering Optional Accessories
Consider using Hunter’s optional accessories, including a wall-mounted
or remote speed control. To install and use the accessories, follow
the instructions included with each product. For quiet and optimum
performance of your Hunter fan, use only Hunter speed controls.
Standard Mounting hangs from
the ceiling by a downrod (included),
recommended for ceilings 8 feet or higher
Angle Mounting recommended for a
vaulted or angled ceiling
Your fan includes an extension
downrod, which should be used
only when installing the fan on a
ceiling 10 feet or higher. All Hunter
fans use sturdy 3/4” diameter pipe
to assure stability and wobble-free
performance.
A standard downrod is provided
for installing your fan on a ceiling
8-10 feet high. Note: e decorative
twig attachment will not t on the
standard downrod.
For ceilings 10 feet or higher, an
extension downrod and decorative
twig attachment are provided. e
decorative twig cannot be added to
the fan when installing on ceilings
lower than 10 feet.
