Filter
Top Products
8
44062-01 • 06/08/2010
Humidifier Assistance
Troubleshooting
4
Problem:
Excessive noise.
Solution:
1. Check the water tank to make sure it is properly seated on the base.
2. Check the water tank to make sure there are no bubbles when the water tank
is full and running. If there are bubbles, turn the unit OFF until the bubbling
stops. When the bubbling has stopped, set the unit to the desired speed.
Problem:
Humidier not working.
Solution:
1. Make sure the power knob is not set to OFF and the unit is plugged into a
working wall outlet.
Problem:
Mineral build-up on the water tank or water tray.
Solution:
1. Refer to the section “Cleaning and Storage” on page 6.
Problem:
Humidity output and water usage decreased.
Solution:
1. Check the power knob to make sure it is set to the desired speed.
2. Check the water tank to make sure there are no bubbles when the water tank
is full and running. If there are bubbles, turn the unit OFF until the bubbling
stops. When the bubbling has stopped, set the unit to the desired speed.
3. Clean any components that have mineral build-up. Refer to the section
“Cleaning and Storage” on page 6.