Filter
Top Products
13 41558-01
Air Purier Maintenance
3. Gently pull on the lter to remove it from the unit. While removing the lter, note
the directional arrows printed on the top of the lter. The lter will be reinstalled
with the same orientation. Refer to Fig. 12.
4. The label on the top side of the lter points to the side that should be cleaned.
Refer to Fig. 12. With a vacuum cleaner and upholstery brush attachment, clean
the lter until all particles are removed. Do not use water or liquids to clean.
5. Install the lter with arrows pointing towards the unit. Refer to Fig. 12. Press the
lter rmly into the air purier. To avoid damaging the lter media, you should
press on the frame of the lter only.
6. Place the front grill back onto the unit. First, line up the tab on the bottom of
the grill with the recess on the purier base and then push the top of the grill
forward until it is closed. Refer to Figs. 6 and 7 (pg. 7). NOTE: This unit will not
operate unless the grill is in the correct position.
7. Plug in the unit.
8. To reset the lter counter, press the FILTER RESET key for 2 seconds. The Filter
Counter will return to 100% and the Filter indicator will stop ashing.
Fig. 12