Filter
Top Products
6
41663-01 9/19/2003 © 2003 Hunter Fan Company
Mounting the Air Purifier to the Wall
For Model 30057 Only:
Your air purifier has keyhole slots on the back which can be used to mount your air
purifier to the wall. To mount your air purifier to the wall, use plastic dry wall type
anchors #14-16 and 1/4" lag screws 1 1/2" long, or equivalent. While your unit is
designed to accommodate wall mounting, the optimum performance will be achieved
when the unit is placed on the floor, 6 inches away from the walls.
Replacement Filters:
To obtain a replacement filter for your Air Purifier, call 1-800-4Hunter for your
nearest retailer or Hunter Customer Service at 901-248-2222. Please be prepared
to tell the operator the model number of your Air Purifier and the model number of
the filter you need to replace.
Air Purifier Mdl. No. Filter Mdl. No. Pre-Filter Mdl. No.
30057 30928 30901
30067 30928 30901
30124 30928 30901
30251 30931 30901
How The HEPAtech
TM
System Works
The above is an illustration of how the HEPAtech air purification system works.
Dust and other irritants are pulled into the air purification system and cleaned through
the HEPAtech Filter. Clean, purified air is then released into the room.