Filter
Top Products
3
© 2003 Hunter Fan Company 41663-01 9/19/2003
Using the Ionizer
Using the ionizer improves the quality of air in the room. Negative ions are re-
leased into the air and positively charged dust, smoke, and pollen particles are
attracted to the negative ions. These particles settle out of the air and can be vacu-
umed up during normal cleaning. These particles are also more easily captured by
the HEPAtech™ filter as they pass through the HEPAtech™ Air Purification Sys-
tem. To ensure the best air circulation in the room, we recommend that you place
your air purifier six inches away from any walls.
Using Your Air Purifier
1. Remove your air purifier from the box and take it out of the clear plastic pro-
tective bag.
2. Place your HEPAtech™ Air Purification System on a firm, flat surface.
3. Before turning the Air Purifier ‘on’, you need to open the front grill.
For Models 30057 & 30251:
To release the front grill, place your fingers behind the tabs and pull forward.
For Models 30067 & 30124:
To release the front grill, press the buttons on the side until the front grill slides
easily over the buttons.
4. The filter will be installed in the correct position. Grasp the filter and pull it
forward. Remove the plastic wrapping and replace the filter in the unit. The
white filter material should be facing outward (towards you) and the wire mesh
side should be hidden from view (inside the unit).
5. Replace the front grill. Be sure that the bottom tabs are in location first, and
then push the top of the grill forward until it is closed. The unit is now ready
for normal operation. Note: This unit will not operate unless the door is placed
in the correct position.
6. Plug the unit into a 120V electrical outlet.