Filter
Top Products
12
42663-01 • 10/23/08 • Hunter Fan Company
Installing the Glass Bowl
7-9. First install B10 candelabra bulbs (40
Watt Maximum) into the sockets.
7-10. read the pull chains through the hole
in the center of the glass bowl.
7-11. read the fan pull chain through the
hole in cover plate. read the light pull
chain through the nial.
7-12. Screw the nial onto the threaded rod
end until tight.
7-13. Attach the extra pull chains (included)
to the fan pull chain and light pull chain
using the plastic breakaway connector.
(You may nd the plastic breakaway
connector on the end of the extra
chain.)
7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Light Bulbs
(B10
Candelabra
Base 40 Watt
Maximum)
Finial
Breakaway
Connector
readed
Rod
Glass Bowl
Cover Plate
Breakaway
Connector
Note: In compliance with US federal energy
regulations this ceiling fan contains
a device that restricts the light kit to
a maximum of 190 Watts. Exceeding
that limit or the marked limit on this
product may result in re hazard or
improper operation.