Filter
Top Products
11
42663-01 • 10/23/08 • Hunter Fan Company
Light
Kit
Plug
Connectors
Partially-
Installed
Screws
Steps 7-5 – 7-6
Assembly Screw
Plug
Connector
Detail
7-5. To attach the light kit, connect the upper plug connector from the
fan to the lower plug connector in the light kit.
Note: Both plug connectors are polarized and will only t together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-6. Partially install two assembly screws into the upper switch
housing.
7-7. Align the keyhole slots with the assembly screws.
7-8. Turn the light kit clockwise until the assembly screws are rmly
situated in the narrow ends of the keyhole slots. Install the
remaining screw into the light kit. Tighten all three screws rmly.
CAUTION: Make sure the light kit is securely attached to the
upper switch housing. Failure to properly attach and tighten all three
assembly screws could result in the switch housing and light xture
falling.
7 • Completing Your Installation With a Bowl Light Fixture (Continued)