Filter
Top Products
3. Being careful not to damage the pole finish,
(with assistance from at least one other person)
place the hole in the center of the table over the
lower pole segment. Align the notch in the lower
adapter with the bolt. Rest the table on the bolt.
4. With the notch resting on the bolt, rotate the
table clockwise to secure it to the pole.
2. Attach the upper adapter to the table with
six adapter screws with washers. read the
lower adapter into the upper adapter and
rotate one to two turns.
Note: e lower adapter should not be
over-tightened. It should remain loose in
the upper adapter to properly attach to the
table.
Table
Lower Pole
Segment
Table
Upper
Adapter
Lower
Adapter
Hardware Needed:
Adapter Screw
64193-03-247
(x 6)
Table
Hardware Needed:
Washer
64187-01-247
(x 6)
Step2
Step3-4