Filter
Top Products
7©2009 Hunter Fan Co. 44827-01 20091015
Figure 9.
MOTOR ASSEMBLY
1. Grasp the Telescope Pole firmly and twist the
Adjustment Knob Counter Clockwise to loosen.
Figure 7.
2. Raise the Inner Pole and tighten the Adjustment Knob
by twisting Clockwise until secure.
3. Set the Motor(5) on top of the Pole(3), Figure 8., and
Secure using the Motor Bolt(6) and Knob(7). Figure
9.
Note: The Motor Bolt has a square cut on the inside of the
head, ensure this fits securely into the square hole in the
Pole. Do not overtighten the Motor Knob, as this could
make it difficult to tilt the motor later.
After securing the motor(5), Screw in the Tilt Adjustment
Knob(8) securely. Figure 10. This Knob allows you to
adjust the fans angle.
Figure 7.
Figure 8.
Figure 10.
(5) Motor
(3) Telescope
Pole
(6) Motor
Bolt
(7) Motor
Knob
(8) Tilt Adjustment
Knob