Hunter Fan 20091015 Fan User Manual


 
5©2009 Hunter Fan Co. 44827-01 20091015
Figure 1.
This appliance is for household use only and may be
plugged into any 120-volt AC electrical outlet (ordinary
household current). DO NOT use any other type of outlet.
This unit is suitable for grounded receptacle use
only.
The power cord has a grounded plug as shown in Figure
1, and must be used with an electrical outlet that can ac-
commodate the grounding pin. If your electrical outlet can
not accommodate the grounding pin, then you must pur-
chase and install one of the two types of adapters shown in
Figure 2. NOTE: The adapters ARE NOT supplied with this
fan. Read, follow, and save the instructions that are includ-
ed with the adapter you choose. Do not use an adapter if
your electrical outlet can accommodate the grounding pin.
LINE CORD SAFETY TIPS
1. NEVER pull or yank on the cord or the appliance.
2. To insert plug, grasp it rmly and guide it into the out-
let.
3. To disconnect the appliance, grasp the plug and re-
move it from the outlet.
4. Before each use, inspect the line cord for cuts and/
or abrasion marks. If any are found, the appliance
should be serviced and the line cord replaced. Please
return it to our Service Department or to an authorized
service representative.
5. NEVER wrap the cord tightly around the appliance,
as this could place undue stress on the cord where it
enters the appliance and could cause it to fray and
break.
6. DO NOT operate appliance if the line cord shows any
damage, if the appliance works intermittently or stops
working entirely.
Grounded
Plug
Grounding Pin
Grounded Outlet
Box Cover
Warning
Figure 2.
Grounded Outlet
Box Cover
Metal
Screw
Adapter
Grounding
Means
GROUNDING