Hoover Wet/Dry Vacuum cleaner Vacuum Cleaner User Manual


 
5
1-4
1-5
1-6
1-7
1-9
1-8
For wet pick-up
Slide foam filter (B) over filter cage
(A).
Make sure that the foam filter is
pushed to the top of filter cage near
the ribs (E).
Do not use paper filter for wet
pick-up.
Attach cleaner lid
(except Supreme 12.5 gallon)
With latches (F) rotated outward,
align wand storage clips (G) with
“ears” (H) on top of tank.
Rotate latches inward to lock lid in
place.
Note: For convenience in attaching
and removing the lid, finger holds
have been provided.
Attach cleaner lid
(Supreme 12.5 gallon)
Rotate lid latches (I) outward. Align
ribs (J) on front of tank with slots (K)
on either side of hose inlets; place
lid on tank.
Rotate latches inward to lock lid in
place.
Note: For convenience in attaching
and removing the lid, finger holds
are provided.
Attach hose, wands
and cleaning tool
Push hose into hose inlet (A) or (B)
on cleaner lid; twist hose to tighten
or loosen connection.
The wands and tools attach to hose
in the same manner.
Press squeegee insert (available on
some models) firmly into nozzle
opening.
Use squeegee for wet pick-up only.
Additional tools and accessories
that are not included with your
model are available at additional
cost from your Hoover Factory
Service Center, Authorized
Hoover Warranty Dealer, by using
the enclosed order form, or
through The Hoover Comapny on-
line at www.hoovercompany.com
A
A
E
B
F
J
I
I
K
G
H
H
Attach drain cap
(Available some models)
Screw drain cap onto lower, front of
tank as shown.
A
B