Filter
Top Products
HOW TO ASSEMBLE
A. Attach handle to the cleaner
Unscrew nut and remove bolt and
plate from handle socket.
Place bottom section of handle into
handle socket lining up small holes
toward front of cleaner. Cord will
run up indentation at base of handle,
Insert bolt into hole in front of handle.
Place plate over end of bolt and hole
at back of handle. The tab at the bot-
tom of the plate will fit into the han-
dle and the tabs of the handle bail
will fit the cutout areas of the plate.
Secure with nut. Tighten nut with
screwdriver.
4
I
--l